Diablo enters room
Despite reading some problems with it, some related with the new mail client -- but I don't use it, of course ;-) -- I decided to do it for first, and, if it works as promised, for last time too:
# ./flasher-3.0.amd64 -F RX-44_DIABLO_4.2008.23-14_PR_COMBINED_MR0_ARM.bin -f -R
flasher v0.8.1 (Jan 5 2007)
SW version in image: RX-44_DIABLO_4.2008.23-14_PR_MR0
Image 'kernel', size 1536512 bytes
Version 2.6.21-200823maemo3
Image 'initfs', size 2286848 bytes
Version 0.95.16-200823maemo2
Image 'rootfs', size 125042688 bytes
Version RX-34+RX-44+RX-48_DIABLO_4.2008.23-14_PR_MR0
Image '2nd', size 8192 bytes
Valid for RX-44: 0808
Version 1.1.16-200823maemo1
Image 'xloader', size 9216 bytes
Valid for RX-44: 0808
Version 1.1.16-200823maemo1
Image 'secondary', size 100736 bytes
Valid for RX-44: 0808
Version 1.1.16-200823maemo1
Image '2nd', size 8192 bytes
Valid for RX-44: 0801, 0802, 0803, 0804, 0805, 0806, 0901, 0902
Image 'xloader', size 9216 bytes
Valid for RX-44: 0801, 0802, 0803, 0804, 0805, 0806, 0901, 0902
Version 1.1.16-200823maemo1
Image 'secondary', size 100736 bytes
Valid for RX-44: 0801, 0802, 0803, 0804, 0805, 0806, 0901, 0902
Version 1.1.16-200823maemo1
Suitable USB device not found, waiting
USB device found found at bus 001, device address 009
Found device RX-44, hardware revision 0805
NOLO version 1.1.6
Version of 'sw-release': RX-44_2008SE_1.2007.42-19_PR_MR0
Sending xloader image (9 kB)...
100% (9 of 9 kB, avg. 2250 kB/s)
Sending secondary image (98 kB)...
100% (98 of 98 kB, avg. 8943 kB/s)
Flashing bootloader... done.
Sending kernel image (1500 kB)...
100% (1500 of 1500 kB, avg. 8774 kB/s)
Flashing kernel... done.
Sending initfs image (2233 kB)...
100% (2233 of 2233 kB, avg. 11110 kB/s)
Flashing initfs... done.
Sending and flashing rootfs image (122112 kB)...
100% (122112 of 122112 kB, avg. 6928 kB/s)
Finishing flashing... done
I didn't do any backup, so I've started from scratch again with it. Just for reference the detailed instructions for flashing are described in maemo.org wiki.