Older blog entries for etbe (starting at number 1024)

Samsung Galaxy S3 First Review with Power Case

My new Samsung Galaxy S3 arrived a couple of days ago. Kogan added to the weirdness in their shipping that I documented in a previous post [1] by shipping the two phones on consecutive days with separate invoices for $789 each (as opposed to the $449 that I paid). This means that if customs were to track this down they could bust me for import duties (which apply whenever you order more than $1000 of electronics from another country) as multiple shipments in a small period of time are aggregated for tax purposes. It also means that it would be easy to defraud the tax office or an employer about the cost of the devices if I didn’t blog about it…

Phone and Case Review

back of power case with S3 installed next to back plastic of S3 S3 and case next to each other

To install the Samsung Galaxy S3 in the power case I bought from Kogan the back of the S3 has to be removed. One annoying implication of this is that when using the phone in it’s case I will either have to carry the back of the phone with me or have no option of removing the case during the day. The phone has to slide in to the case from a small angle and if it’s removed carelessly there seems to be a risk of breaking the power connector on the case.

S3 on power case stand edge view of S3 in power case stand

The above photos show the kick-stand on the power case in use, I haven’t yet had an opportunity to use the stand for anything other than photography and as it’s made of thin plastic there’s a reasonable chance that it will break off before I ever use it properly.

One major deficiency of the power case is that it has no protection for the screen. The typical gel case will extend by about 2mm above the screen which means that you can place the phone screen-down on a table without a risk of scratching the screen. Also if a phone in a gel case is dropped on a hard surface it seems likely that the chance of the screen hitting a bump and cracking will be lower although I’m not aware of any research regarding how well this theory works in practice. This combined with the fact that the power case is smooth and difficult to grip makes it quite unsuitable for regular use. I am concerned that the added mass of the power case would increase the risk of serious phone damage if it’s dropped screen-down.

I plan to buy a gel case ASAP which I will use most of the time. I will swap the gel case for the power case on the occasions when I expect to spend an extended period of time away from home or an office where I can charge my phone. The power case really should have been designed with a flange that extends above the level of the screen on all sites. It also shouldn’t be smooth on the outside.

Phone Review

The Galaxy S3 equals the Galaxy S for the title of the most slippery phone I’ve ever owned. This combined with the fact that the Galaxy S3 is slightly thinner and also 10% wider and longer makes it a more difficult phone to hold. It’s a phone that really needs a case with a lot of grip.

The camera is reasonable given the fact that any device that is 8.6mm thick will have a very small focal length and also a very small CCD for receiving light. The laws of physics just don’t allow something the size of the Galaxy S3 to have a half-decent camera. My ideal mobile phone would be about the size of the Galaxy S3 with the power case, it would use the extra thickness for a big battery as well as a much longer focal length for the camera. I’d like a phone to be about 16mm thick over most of it’s area with a section that’s 20mm for the camera. The burst shot mode (which allows you to take 20 pictures rapidly) is good for capturing certain types of relatively slow movement (EG someone’s mouth moving when they talk). But it’s no good at all if you try to pan the camera while doing burst mode.

When I first started using the phone it gave me lots of hints about using various functions. This wasn’t particularly useful for me as most things are obvious to anyone who has much experience with computers and the non-obvious things are probably going to be forgotten if you are doing something else when the help system prompts you. It will be useful for my sister in law who’s getting the other phone, but the down-side of this is that I can’t configure her phone before delivering it. She needs to use it first to see all the tips.

The Galaxy S3 has a screen that’s 4.8″ diagonally which is slightly larger than the 4.0″ screens of my previous Android phones (Sony Ericsson Xperia X10 and Samsung Galaxy S). That gives 44% more screen area which is a good thing. Unfortunately many apps seem to display the same amount of data, I had hoped that 44% more area and 140% more pixels would result in most apps displaying more data by default. Fortunately ConnectBot (my SSH client of choice) gives me 60 rows and 120 columns on the Galaxy S3 as opposed to the mere 31 rows and 80 columns on the Xperia X10. I don’t use ConnectBot that often (a phone is a really bad ssh client no matter how you do it), but when I do it’s really important and the extra space matters.

The down-side of the larger screen for me is that the distance from the center of the palm of my hand to the end of my thumb is slightly less than 4.8″. This means that I can’t hold the Galaxy S3 with one corner in the palm of my hand and still reach the far corner of the screen. So I am forced to hold the sides of the phone for one-handed use which means that it would be easier for it to slip out of my hand. A further complication is that the settings and back buttons are very close to the edge of the phone and can be hit by accident very easily. Hopefully a gel case will alleviate that. But I have never owned a hand-held device which was so difficult to hold in a stock configuration.

According to AndroSensor (one of my favorite demo programs for showing useless things that a phone can do) the Galaxy S3 lacks support for measuring humidity and external temperature but it has all the other sensors. I think I can survive without knowing how hot and humid my pockets are, but it would still be nice to have every possible feature.

The default partitioning of the phone storage is to have all internal storage used for applications and none used for a VFAT filesystem accessible over USB. It’s nice that I won’t run out of application storage space (a problem I’ve had with every other Android device) but it does mean that I’ll have to buy a micro SD card before I can use the phone properly. Micro SD storage costs about $1.50 per gig in the size range from 8G to 32G, it’s not particularly expensive but it’s annoying to have the phone not be fully usable right from the start. Without using a SD card I have to use gphoto2 to download pictures from the phone so it’s fully usable in every way. But the cost of the power case, the gel case I’m about to buy, and an SD card make the phone less of a bargain.

The phone has more RAM, a faster CPU, and Android 4.1. These are all really good things, but nothing worth writing about in a review.

Conclusions

The power case is very poorly designed, I probably wouldn’t buy it if I knew then what I know now.

For one-handed phone use by someone like me with longer than average fingers a 4.0″ phone is about the largest possible. This doesn’t mean that phones should stay small, but it does mean that Apple weren’t being entirely silly when they released all the 3.5″ iPhones. Presumably a large portion of the population would find a 3.5″ phone to be as usable as a 4.0″ phone is for me. It now seems to me that as a 4.8″ screen is going to be impractical for one-hand use by almost everyone the phone designers should concentrate more on larger phones similar to the Samsung Galaxy Note. I think that the 4.8″ screen size may be ideal for some young children who could use it the way an adult might use a 7″ tablet – an Android phone seems to be a relatively common present for children in the 6-12 age range.

Generally I think that no-one should ever buy a new phone or tablet without trying one of the same size. While I am happy with the S3 it really doesn’t work in the way I expected.

Having 2.9* as many characters on screen for ConnectBot is a massive benefit. If I ever write another magazine article on a hand-held device the extra size and resolution will really help if I found a suitable editor (please make suggestions in the comments). For the WordPress client to write long blog posts on it then the screen could potentially be reasonably useful, but so far it seems that it’s more suited to reviewing posts and comments than to writing posts.

Generally the Samsung Galaxy S3 is a good phone and I think it’s great value for money when it’s less than $500.

Related posts:

  1. CyanogenMod and the Galaxy S Thanks to some advice from Philipp Kern I have now...
  2. Galaxy S vs Xperia X10 and Android Network Access Galaxy S Review I’ve just been given an indefinite loan...
  3. Back to the Xperia X10 10 months ago I was given a Samsung Galaxy S...

Syndicated 2012-12-20 14:43:10 from etbe - Russell Coker

Using BTRFS

I’ve just installed BTRFS on some systems that matter to me. It is still regarded as experimental but Oracle supports it with their kernel so it can’t be too bad – and it’s almost guaranteed that anything other than BTRFS or ZFS will lose data if you run as many systems as I do and I run lots of systems that don’t have enough RAM for ZFS (4G isn’t enough in my tests). So I have to use BTRFS.

BTRFS and Virtual Machines

I’m running BTRFS for the DomUs on a virtual server which has 4G of RAM (and thus can’t run ZFS). The way I have done this is to use ext4 on Linux software RAID-1 for the root filesystem on the Dom0 and use BTRFS for the rest. For BTRFS and virtual machines there seem to be two good options given that I want BTRFS to use it’s own RAID-1 so that it can correct errors from a corrupted disk. One is to use a single BTRFS filesystem with RAID-1 for all the storage and then have each VM use a file on that big BTRFS filesystem for all it’s storage. The other option is to have each virtual machine run BTRFS RAID-1.

I’ve created two LVM Volume Groups (VGs) named diska and diskb, each DomU has a Logical Volume (LV) from each VG and runs BTRFS. So if a disk becomes corrupt the DomU will have to figure out what the problem is and fix it.

#!/bin/bash
for n in $(xm list|cut -f1 -d\ |egrep -v ^Name\|^Domain-0) ; do
  echo $n
  ssh $n "btrfs scrub start -B -d /"
done

I use the above script in a cron job from the Dom0 to scrub the BTRFS filesystems in the DomUs. I use the -B option so that I will receive email about any errors and so that there won’t be multiple DomUs scrubbing at the same time (which would be really bad for performance).

BTRFS and Workstations

The first workstation installs of BTRFS that I did were similar to installations of Ext3/4 in that I had multiple filesystems on LVM block devices. This caused all the usual problems of filesystem sizes and also significantly hurt performance (sync seems to perform very badly on a BTRFS filesystem and it gets really bad with lots of BTRFS filesystems). BTRFS allows using subvolumes for snapshots and it’s designed to handle large filesystems so there’s no reason to have more than one filesystem IMHO.

It seems to me that the only benefit in using multiple BTRFS filesystems on a system is if you want to use different RAID options. I presume that eventually the BTRFS developers will support different RAID options on a per-subvolume basis (they seem to want to copy all ZFS features). I would like to be able to configure /home to use 3 copies of all data and metadata on a workstation that only has a single disk.

Currently I have some workstations using BTRFS with a BTRFS RAID-1 configuration for /home and a regular non-RAID configuration for everything else. But now it seems that this is a bad idea, I would be better off just using a single copy of all data on workstations (as I did for everything on workstations for the previous 15 years of running Linux desktop systems) and make backups that are frequent enough to not have a great risk.

BTRFS and Servers

One server that I run is primarily used as an NFS server and as a workstation. I have a pair of 3TB SATA disks in a BTRFS RAID-1 configuration mounted as /big and with subvolumes under /big for the various NFS exports. The system also has a 120G Intel SSD for /boot (Ext4) and the root filesystem which is BTRFS and also includes /home. The SSD gives really good read performance which is largely independent of what is done with the disks so booting and workstation use are very fast even when cron jobs are hitting the file server hard.

The system has used a RAID-1 array of 1TB SATA disks for all it’s storage ever since 1TB disks were big. So moving to a single storage device for /home is a decrease in theoretical reliability (in addition to the fact that a SSD might be less reliable than a traditional disk). The next thing that I am going to do is to install cron jobs that backup the root filesystem to something under /big. The server in question isn’t used for anything that requires high uptime, so if the SSD dies entirely and I need to replace it with another boot device then it will be really annoying but it won’t be a great problem.

Snapshot Backups

One of the most important uses of backups is to recover from basic user mistakes such as deleting the wrong file. To deal with this I wrote some scripts to create backups from a cron job. I put the snapshots of a subvolume under a subvolume named “backup“. A common use is to have everything on the root filesystem, /home as a subvolume, /home/backup as another subvolume, and then subvolumes for backups such as /home/backup/2012-12-17, /home/backup/2012-12-17:00:15, and /home/backup/2012-12-17:00:30. I make /home/backup world readable so every user can access their own backups without involving me, of course this means that if they make a mistake related to security then I would have to help them correct it – but I don’t expect my users to deal with security issues, if they accidentally grant inappropriate access to their files then I will be the one to notice and correct it.

Here is a script I name btrfs-make-snapshot which has an optional first parameter “-d” to cause it do just display the btrfs commands it would run and not actually do anything. The second parameter is either “minutes” or “days” depending on whether you want to create a snapshot on a short interval (I use 15 minutes) or a daily snapshot. All other parameters are paths for subvolumes that are to be backed up:

#!/bin/bash
set -e

# usage:
# btrfs-make-snapshot [-d] minutes|days paths
# example:
# btrfs-make-snapshot minutes /home /mail

if [ "$1" == "-d" ]; then
  BTRFS="echo btrfs"
  shift
else
  BTRFS=/sbin/btrfs
fi

if [ "$1" == "minutes" ]; then
  DATE=$(date +%Y-%m-%d:%H:%M)
else
  DATE=$(date +%Y-%m-%d)
fi
shift

for n in $* ; do
  $BTRFS subvol snapshot -r $n $n/backup/$DATE
done

Here is a script I name btrfs-remove-snapshots which removes old snapshots to free space. It has an optional first parameter “-d” to cause it do just display the btrfs commands it would run and not actually do anything. The next parameters are the number of minute based and day based snapshots to keep (I am currently experimenting with 100 100 for /home to keep 15 minute snapshots for 25 hours and daily snapshots for 100 days). After that is a list of filesystems to remove snapshots from. The removal will be from under the backup subvolume of the path in question.

#!/bin/bash
set -e

# usage:
# btrfs-remove-snapshots [-d] MINSNAPS DAYSNAPS paths
# example:
# btrfs-remove-snapshots 100 100 /home /mail

if [ "$1" == "-d" ]; then
  BTRFS="echo btrfs"
  shift
else
  BTRFS=/sbin/btrfs
fi

MINSNAPS=$1
shift
DAYSNAPS=$1
shift

for DIR in $* ; do
  BASE=$(echo $DIR | cut -c 2-200)
  for n in $(btrfs subvol list $DIR|grep $BASE/backup/.*:|head -n -$MINSNAPS|sed -e "s/^.* //"); do
    $BTRFS subvol delete /$n
  done
  for n in $(btrfs subvol list $DIR|grep $BASE/backup/|grep -v :|head -n -$MINSNAPS|sed -e "s/^.* //"); do
    $BTRFS subvol delete /$n
  done
done

A Warning

The Debian/Wheezy kernel (based on the upstream kernel 3.2.32) doesn’t seem to cope well when you run out of space by making snapshots. I have a filesystem that I am still trying to recover after doing that.

I’ve just been buying larger storage devices for systems while migrating them to BTRFS, so I should be able to avoid running out of disk space again until I can upgrade to a kernel that fixes such bugs.

Related posts:

  1. BTRFS and ZFS as Layering Violations LWN has an interesting article comparing recent developments in the...
  2. Starting with BTRFS Based on my investigation of RAID reliability [1] I have...
  3. ZFS vs BTRFS on Cheap Dell Servers I previously wrote about my first experiences with BTRFS [1]....

Syndicated 2012-12-17 00:39:42 from etbe - Russell Coker

Globalisation and Phone Calls

I just watched an interesting TED talk by Pankaj Ghemawat (of which the most important points are summarised in a TED blog post) about the world not being as globalised as people expect [1]. One point is that only 2% of traditional voice phone calling minutes (and ~6% when you include VOIP) are for international calls which is less than most people expect.

After reading that it occurred to me that most of the “included value” in my mobile phone contract goes unused, I pay for extra data transfer and it includes voice calling credit that I don’t use. So out of $450 of included calls I typically use much less than $50. $400 of calls to even the most expensive countries is about 100 minutes of talking. So the logical thing to do is to find people in other countries to call.

If you are involved in the FOSS community and would like to speak to me then send me an email with your phone number, time zone, and a range of times that are convenient. I won’t make any promises about calling you soon (I could use up my monthly credit on a single call), but I will call you eventually.

I will also send email to some people I know by email and suggest a chat. Some years ago I did this with people who were involved in SE Linux development and it seemed to help the development of the SE Linux community.

Also if anyone in Australia wants to speak to me then that’s OK too. While Pankaj’s talk inspired me to call people I’m not dedicated to calling other countries.

Related posts:

  1. Is Lebara the Cheapest Mobile Phone company in Australia? My parents have just got a mobile phone with a...
  2. Wyndham Resorts is a Persistent Spammer Over the last week I have received five phone calls...
  3. mobile phone etiquette Paul Dwerryhouse blogs about mobile phone etiquette. Taking excessive calls...

Syndicated 2012-12-14 13:17:08 from etbe - Russell Coker

Dependencies in Online Ordering

I have just ordered two Samsung Galaxy S3 phones and matching cases from Kogan. The price was good and Kogan gave me 30 cents discount as part of a verification process. Instead of billing the full amount for a large order (for which the cutoff is somewhere between $25 and $1014) Kogan will deduct a random number of cents and demand that you confirm the amount of money on your credit card statement, if you don’t know the amount that was billed then it’s a fraudulent transaction.

But now Kogan have decided that my phones and cases are separate things, they have dispatched the cases but not the phones. This is really annoying, I will have to arrange to receive two separate parcels and the first of which won’t be of any immediate use to me. I can use a phone without a case, but a case without a phone isn’t useful.

If I had wanted to receive two parcels then I would have gone through the checkout process twice! It should have been really obvious to Kogan that I didn’t want two parcels, they suggested that I buy cases after I selected the phones, so while it’s theoretically possible that I might want to buy two new phones at the same time as buying two cases for entirely unrelated phones I don’t think that the people who programmed the Kogan web server expected that to be the case.

Related posts:

  1. Is Lebara the Cheapest Mobile Phone company in Australia? My parents have just got a mobile phone with a...
  2. Changing Phone Prices in Australia 18 months ago when I signed up with Virgin Mobile...
  3. Ingress Today Google sent me an invite for Ingress – their...

Syndicated 2012-12-11 10:45:56 from etbe - Russell Coker

Links December 2012

Steven Johnson gave an interesting TED talk about where good ideas come from [1]. He starts by attributing coffee replacing alcohol as a standard drink for some good ideas and then moves on to how ideas develop.

Erez Lieberman Aiden and Jean-Baptiste Michel gave an interesting and amusing TED talk about the ngram analysis of books that Google scanned [2]. Here is the link for the Google Books ngram search [3].

Clay Shirky gave an insightful TED talk about how the Internet is changing the world [4]. He cites Open Source programmers as the modern day equivalent to the Invisible College based on our supposed great ability to get along with other people on the Internet. If we really are so much better than the rest of the Internet then things must be bad out there. He ends with ways of using Git to draft legislation.

Hans Rosling gave an interesting TED talk about religion and the number of babies that women have [5]. His conclusion is that it’s more about income and social stability and that the world’s population can stabilise at 10 billion if we provide family planning to everyone.

Alexis C. Madrigal wrote an interesting interview with Genevieve Bell about her work at Intel and the way people use technology [6].

Indigogo is raising funds for the “Cuddle Mattress”, it’s a mattress with foam slats and a special fitted sheet to allow your arm to slide between the slats [7]. So you could have your arm underneath your SO for an extended period of time without risking nerve damage. They also show that when sleeping on your side your shoulder can go between the slats to avoid back problems.

Nate Silver (who is famous for predicting US elections gave an interesting TED talk about racism and politics [8]. One of his main points is to show the correlation between racism and lack of contact of members of other races.

Sociological Images has an interesting article by Lisa Wade about whether marriage is a universal human value [9]. In regard to historical marriage she says “women were human property, equivalent to children, slaves, servants, and employees”. The general trend in the comments seems to be that there are so many types of marriage that it’s difficult to make any specific claims to traditional marriage unless you count a tradition of a short period in a single geographic region.

Plurality is an excellent sci-fi short movie on youtube [10].

TED has an interesting interview with Hakeem Oluseyi about his research about astrophysics and how he achieved a successful career after being a gangster as a teenager [11]. He has some good ideas about helping other children from disadvantaged environments become successful.

Paul Dwerryhouse wrote an interesting blog post about his work in designing and implementing a filesystem based on a Cassandra data store with FUSE [12]. Paul also wrote a post about using Apache Zookeeper to lock metadata to permit atomic operations [13].

The documentary “Monumental Myths” provides an interesting and insightful analysis of the processes of creating, maintaining, and explaining monuments [14]. It focusses on some significant monuments in the US and explains both sides to each story. Howard Zinn makes the insightful point that “when people present a certain point of view of history it’s not controversial, as soon as you present the other side they call it controversial“. That happens even in debates about current issues. Howard also says “to criticise whatever the government does is not anti-America, it’s anti-government, it’s pro-America, it’s pro the people, it’s pro the country“. The song that plays during the closing credits is interesting too.

The music video “Same Love” is one of the best presentations of the argument for marriage equality [15].

Chris Samuel wrote an interesting post about systems locked down for Windows 8 and options for purchasing PCs for running Linux [16]. His solution is to buy from ZaReason. I saw his laptop in action at the last LUV meeting and it looks really nice. Unfortunately a byproduct of the extremely thin form factor is the fact that it lacks a VGA port, this meant that Chris had to use my Thinkpad T61 (which is rather clunky by comparison) for his presentation.

Related posts:

  1. Links March 2012 Washington’s Blog has an informative summary of recent articles about...
  2. Links November 2012 Julian Treasure gave an informative TED talk about The 4...
  3. Links April 2012 Karen Tse gave an interesting TED talk about how to...

Syndicated 2012-12-11 06:10:29 from etbe - Russell Coker

Returning the Aldi Tablet

I have decided to return the 7″ Android tablet I bought from Aldi last week [1]. I still think that the tablet isn’t all bad, but the main problem I had is the short battery life. The battery can be entirely exhausted in less than an hour’s use. Another problem is the fact that most of the Angry Birds games just abort on startup, as my plans for the tablet involved some recreational use this is a significant problem.

The final factor that made me decide to return it is the fact that Kogan offered a special deal on a Samsung Galaxy S3 [2] for $449. That ended up as $507 per phone for two phones that have PowerCases (which more than double the battery life as well as protecting the phone from being dropped). So a Galaxy S3 increments my Android device count and with a 4.8″ 720*1280 display will compete well with a low-end 7″ tablet that only has a 800*480 display (the Galaxy S3 has 2.4* as many pixels).

Aldi offers 60 days money back, so I’ll return the tablet when my Galaxy S3 arrives.

Related posts:

  1. Cheap Android Tablet from Aldi I’ve just bought a 7″ Onix tablet from Aldi....
  2. CyanogenMod and the Galaxy S Thanks to some advice from Philipp Kern I have now...
  3. Back to the Xperia X10 10 months ago I was given a Samsung Galaxy S...

Syndicated 2012-12-10 05:45:41 from etbe - Russell Coker

Ingress

Today Google sent me an invite for Ingress – their latest augmented reality game [1]. The fact that they sent me the invitation while the Google Play store page for Ingress [2] tells me that it’s not available in my country (Australia) is interesting. Google obviously aren’t using their Big Brother powers effectively!

The way to install Ingress if you are in Australia, New Zealand, or other countries where it’s not supported is to do a Google search on the words “Ingress” and “APK” and take the highest available version (1.08 at the moment). Then you will find a web site that offers it with no authentication and the potential of getting a trojan version. Forcing people to install the software in an insecure manner doesn’t seem to be in the best interests of Google.

I first installed the game on my Sony Ericsson Xperia X10 which has a 1 GHz Qualcomm Snapdragon QSD8250 CPU and runs Android 2.3.3 compiled by Sony-Ericsson and performance was terrible. It often would fail to respond to the UI effectively, it would process touch actions after I had repeated them because they didn’t seem to have registered, scrolling text at the same speed as playing audio was apparently impossible.

Then I briefly tried running it on my Samsung Galaxy S which has a 1 GHz (ARM Cortex A8) CPU and runs Android 2.3.7 with a CyanogenMod-7.1.0-GalaxyS build. It seemed to be a bit faster but the difference was small enough that I could have imagined it.

I tried it on the cheap Onix tablet I bought from Aldi this morning [3] but it refused to work every time I tried and eventually crashed the tablet and forced me to use the reset button.

Finally I tried it on a Kogan Agora 10″ tablet running Android 4.0.4 with what Kogan describes as a 1GHz ARMv7 CPU and it seemed a lot more usable. I haven’t yet tried actually playing the game on the Kogan Agora tablet, but the fact that I can read the messages from other players is a significant improvement over the experience on the phones. On the phones the poor performance of the UI made it almost impossible to read messages from other players, now it’s merely extremely annoying.

I’m very disappointed with this. Almost three years ago I reviewed the Seer augmented reality software from IBM that performed tasks that are more demanding and did it well [4]. The IBM Seer software ran on a HTC Hero which had a 528 MHz Qualcomm MSM7600A CPU, it’s really disappointing that Ingress can’t run well on modern phones – particularly as the “augmented reality” part of the game which I’ve seen so far is not much different to what Google Maps, Osmand, and other mapping programs do.

The IBM Seer software was good enough to drive the purchase of new phones. When I first got an Android phone almost two years ago I wanted to run such augmented reality software and it was a factor that determined my choice of phone. Unfortunately I still haven’t found anything to live up to that promise. IBM’s software was tailored to the Australian Open even a tennis fan would find it to be of little interest for about 360 days of the year and I haven’t found any other augmented reality software that is useful and works well (please let me know if there’s something I’ve missed).

I find it difficult to imagine that anyone would be inspired to change their phone purchase plans after seeing a demo of Ingress on any hardware that I own. It seems that it will probably be usable on my Xperia X10 and all features should work on the Kogan Agora tablet, but I don’t think that any of them will allow the game to live up to the hype.

Related posts:

  1. Cheap Android Tablet from Aldi I’ve just bought a 7″ Onix tablet from Aldi....
  2. My Ideal Mobile Phone Based on my experience testing the IBM Seer software on...
  3. The Australian Open and Android Phones (Seer) On Monday the 25th of January 2010 I visited the...

Syndicated 2012-12-05 12:55:45 from etbe - Russell Coker

Cheap Android Tablet from Aldi

back of the onix 7 inch tablet front of the onix 7 inch tablet and cover of manual

I’ve just bought a 7″ Onix tablet from Aldi. It runs Android 4.0.4, has a 1GHz Cortex A8 CPU, 512M of RAM, 16G of flash storage, and a 800*480 display. They are selling rapidly and I don’t know how long they will last – probably you could get a returned one next week if you can’t get one today. But if you like pink then you may be able to get one (the black ones are selling out first).

The tablet seems like a nice piece of hardware, solid construction and it feels nice to hold. Mine has a minor screen defect, but that’s the sort of
thing you expect from a cheap device, apart from that the display is good.

The Wifi doesn’t seem to have as good a range as some other devices (such as my phones and the more expensive 10″ tablet I got from Kogan). This isn’t a
problem for me (the data intensive uses for this device will be in the same room as the AP) but could be a killer for some people. If you have your phone or a dedicated 3G Wifi AP in your pocket while using the tablet then it should be fine, but if you have an AP at the wrong end of your house then you could be in trouble. I found Youtube unusable due to slow downloading even when sitting next to my AP but I can play videos downloaded from iView that are on my local web server (which is more important to me). I expect that I will be able to play local copies of TED talks too.

The camera is bad by phone camera standards, fortunately I have no interest in using a tablet as a camera.

I had no real problems with the Google Play store (something that caused problems for some users of an earlier Aldi Android tablet). Generally the tablet works well.

The people who build Android for modern devices seem remarkably stupid when it comes to partitioning, every device I’ve seen has only a small fraction of the storage usable for apps. This tablet is the worst I’ve ever seen, it has 16G of storage of which there is 512M partitioned for apps of which only 400M is free when you first get the device! It comes pre-installed with outdated versions of the Facebook client and Google Maps (which isn’t very useful on a Wifi device) and some other useless things. If you upgrade them to the latest versions then you’ll probably lose another 100M of the 512M! Fortunately the Android feature to run apps from the VFAT partition works so I haven’t been prevented from doing anything by this problem yet.

In conclusion, it’s not the greatest Android tablet. But you don’t expect a great tablet for $100. What I hoped for was a somewhat low spec tablet that works reasonably well and that’s what I got. I’m happy.

Related posts:

  1. An Introduction to Android I gave a brief introductory talk about Android at this...
  2. Choosing an Android Phone My phone contract ends in a few months, so I’m...
  3. Standardising Android Don Marti wrote an amusing post about the lack of...

Syndicated 2012-12-05 07:01:02 from etbe - Russell Coker

Recruiting at a LUG Meeting

I’m at the main meeting of Linux Users of Victoria (my local LUG). A couple of recruiting agents from Interpro [1] are here and have been working the crowd, one of them is on each side of the room and it seems that their plan is to speak to every person at the meeting and ask about whether they are looking for work.

It is apparently difficult for them to find good Linux candidates and they hope to find people here (they are mainly looking for a senior programmer/team leader and an experienced sysadmin). One of my friends is looking for work but he’s got two interviews for arranged for this week so they will have to be quick if they want to get him. I guess this means that the economy must be going well, or at least it’s not too difficult for Linux people to find work (which is what matters the most to me).

Attending the meeting and talking to people is a good business idea for the recruiters and is generally good for members of the group. Before the meeting starts and during the intermission people just hang out and talk, asking them if they are looking for work generally won’t harm anyone and can really help some people. I wouldn’t want to see multiple agencies doing this at every meeting, but I think that having it happen occasionally is a good thing.

Related posts:

  1. Pre-Meeting Lightning Talks This evening I arrived at the LUV [1] meeting half...
  2. IT Recruiting Agencies – Advice for Contract Workers I read an interesting post on Advogato about IT recruiting...
  3. Debian Lunch Meeting in Melbourne and BSP This afternoon we had a Debian meeting in Melbourne (Australia)...

Syndicated 2012-12-04 08:18:53 from etbe - Russell Coker

Links November 2012

Julian Treasure gave an informative TED talk about The 4 Ways Sound Affects US [1]. Among other things he claims that open plan offices reduce productivity by 66%! He suggests that people who work in such offices wear headphones and play bird-songs.

Naked Capitalism has an interesting interview between John Cusack and Jonathan Turley about how the US government policy of killing US citizens without trial demonstrates the failure of their political system [2].

Washington’s blog has an interesting article on the economy in Iceland [3]. Allowing the insolvent banks to go bankrupt was the best thing that they have ever done for their economy.

Clay Shirky wrote an insightful article about the social environment of mailing lists and ways to limit flame-wars [4].

ZRep is an interesting program that mirrors ZFS filesystems via regular snapshots and send/recv operations [5]. It seems that it could offer similar benefits to DRBD but at the file level and with greater reliability.

James Lockyer gave a movingTEDx talk about his work in providing a legal defence for the wrongly convicted [6]. This has included overturning convictions after as much as half a century in which the falsely accused had already served a life sentence.

Nathan Myers wrote an epic polemic about US government policy since 9-11 [7]. It’s good to see that some Americans realise it’s wrong.

There is an insightful TED blog post about TED Fellow Salvatore Iaconesi who has brain cancer [8]. Apparently he had some problems with medical records in proprietary formats which made it difficult to get experts to properly assess his condition. Open document standards can be a matter of life and death and should be mandated by federal law.

Paul Wayper wrote an interesting and amusing post about “Emotional Computing” which compares the strategies of Apple, MS, and the FOSS community among other things [9].

Kevin Allocca of Youtube gave an insightful TED talk about why videos go viral [10].

Jason Fried gave an interesting TED talk “Why Work Doesn’t Happen at Work” [11]. His main issues are distraction and wasted time in meetings. He gives some good ideas for how to improve productivity. But they can also be used for sabotage. If someone doesn’t like their employer then they could call for meetings, incite managers to call meetings, and book meetings so that they don’t follow each other and thus waste more of the day (EG meetings at 1PM and 3PM instead of having the second meeting when the first finishes).

Shyam Sankar gave an interesting TED talk about human computer cooperation [12]. He describes the success of human-computer partnerships in winning chess tournaments, protein folding, and other computational challenges. It seems that the limit for many types of computation will be the ability to get people and computers to work together efficiently.

Cory Doctorow wrote an interesting and amusing article for Locus Magazine about some of the failings of modern sci-fi movies [13]. He is mainly concerned with pointless movies that get the science and technology aspects wrong and the way that the blockbuster budget process drives the development of such movies. Of course there are many other things wrong with sci-fi movies such as the fact that most of them are totally implausible (EG aliens who look like humans).

The TED blog has an interesting interview with Catarina Mota about hacker spaces and open hardware [14].

Sociological Images has an interesting article about sporting behaviour [15]. They link to a very funny youtube video of a US high school football team who make the other team believe that they aren’t playing – until they win [16]

Related posts:

  1. Links April 2012 Karen Tse gave an interesting TED talk about how to...
  2. Links March 2012 Washington’s Blog has an informative summary of recent articles about...
  3. Links November 2011 Forbes has an interesting article about crowd-sourcing by criminals and...

Syndicated 2012-11-26 06:01:06 from etbe - Russell Coker

1015 older entries...

New Advogato Features

New HTML Parser: The long-awaited libxml2 based HTML parser code is live. It needs further work but already handles most markup better than the original parser.

Keep up with the latest Advogato features by reading the Advogato status blog.

If you're a C programmer with some spare time, take a look at the mod_virgule project page and help us with one of the tasks on the ToDo list!