Older blog entries for caolan (starting at number 206)

WAS700 WASC700-INST key is PHILIPS123XYZ

My WAC700′s hard drive died a while ago, and my efforts to find a disk image I could use to clone a replacement didn’t pan out, leaving me with three useless WAS700 stations which I wanted to reuse as generic stations playing back from a software ps3mediaserver solution. But the blasted stations were configured to use some now long-dead wifi configuration I wasn’t using anymore and they need the station in order to be reconfigured to use a new wiki config.

This thread looked promising, but no success :-(

On the other hand the source for the WAC700 is available from philips, so with a bit of digging it turns out the WEP key for the WAS700 ad-hoc installation mode network WASC700-INST is PHILIPS123XYZ and not Philips123ABC or PhilipsABC123

With the right key, then the WAC700 emulator works wonderfully to reconfigure the stations, and then they can easily find and playback from the ps3mediaserver via auxillary input->select server.


1. wget http://www.p4c.philips.com/files/w/wac700_05/wac700_05_osf_eng.tgz
2. tar xf wac700_05_osf_eng.tgz
3. strings src_release_r4258_6720_1.2.10_en/linux/work/has/appfs/resources/fpm_firmware/20060221_was5_code_IVT1.2.10_release.rom|grep PHILIPS

Syndicated 2013-05-07 19:58:55 from Caolan McNamara

Converting LibreOffice dialogs to .ui format, 200 conversions milestone

We’ve now reached 200 dialogs and tabpages converted from LibreOffice’s classic fixed widget size and position .src format to the GtkBuilder .ui format. These are still our own widgets, we just reuse the file format and map the Gtk widgets to our own equivalents. I’ve now finally refreshed the original sample screen shots to reflect the current reality.

I estimate we require an additional 200 to 400 .ui files, unless a lot of the existing .src dialogs turn out to be orphaned dialog descriptions that are not in use. (This is unlikely)

The How to conversion guide is still relevant, and help is appreciated.

Additionally, there’s a short list of selected dialogs awaiting review for any HIG compliance issues or general layout improvements. We have a python script as ./bin/lint-ui.py (thanks leighman) to check for basic compliance with guidelines, but there’s room for improvement, e.g. checking that widgets have mnemonic widgets, etc.

Syndicated 2013-05-01 15:23:42 from Caolan McNamara

Converting LibreOffice dialogs to .ui format, 150 conversions milestone

We’ve now reached 150 dialogs and tabpages converted from LibreOffice’s classic fixed widget size and position .src format to the GtkBuilder .ui editable by glade format. I’m getting pretty sick of dialogs by now, dialog fatigue setting in :-)

If you want to help, my last post on the topic, at the 100 conversion mark, has a tutorial on how to do a conversion, and my FOSDEM slides might be helpful too.

Syndicated 2013-03-13 11:17:38 from Caolan McNamara

opentype “locl” Localized Forms

Linux LibreOffice 4.1.0 will now support opentype localized forms. Here’s a screenshot of the Linux Libertine O font applied to the same text on each line. One line’s language set to Serbian, the other to Russian. The language of the text gets propagated down correctly to the underlying text layout engine to allow the correct localized Serbian forms to be rendered.

Syndicated 2013-03-12 09:26:51 from Caolan McNamara

Converting LibreOffice dialogs to .ui format, 100 conversions milestone

We’ve now reached 100 dialogs and tabpages converted from LibreOffice’s classic fixed widget size and position .src format to the GtkBuilder .ui editable by glade format. I won’t repeat the full reasons for the conversion, but I’m particularly happy with the new accessibility support, both for the new containers and the .ui loaded.

The a11y stuff can now generally be describable in the .ui file rather than sporadic hard-coded calls here and there. And with the new mnemonic widget for label support, setting in the .ui explicitly what a label is a label for overrides the (eventually to be removed) ugly guessing short-cut code in vcl and sets the default a11y relationship between the label and labelee.

So setting mnemonic widgets in LibreOffice .ui files is now strongly indicated.

Here’s a hopefully helpful step-by-step tutorial for converting a simple dialog from .src to .ui

Syndicated 2013-01-24 11:36:29 from Caolan McNamara

libreoffice sloccount

Output of sloccount on the fedora libreoffice pre-build unpacked libreoffice, i.e. basically the sloccount of libreoffice minus the external modules otherwise normally found in the cross-distro build like libxml2/mozilla/libwpd/etc. So it’s a lower-bound count of libreoffice. Summary comes to 5,167,387 lines.

cpp:        4567442 (88.39%)
java:        387446 (7.50%)
ansic:        92834 (1.80%)
perl:         49149 (0.95%)
python:       27399 (0.53%)
sh:           18174 (0.35%)
yacc:          8235 (0.16%)
cs:            6648 (0.13%)
asm:           3245 (0.06%)
objc:          2600 (0.05%)
lex:           1991 (0.04%)
pascal:         900 (0.02%)
awk:            849 (0.02%)
csh:            247 (0.00%)
lisp:           115 (0.00%)
php:            104 (0.00%)
sed:              9 (0.00%)

don’t get too bogged down in the small numbers of possibly mis-detected source languages

Syndicated 2012-09-12 23:20:36 from Caolan McNamara

Olympics LibreOffice Style

Just noticed that a random fairly lowlevel-dependency-affecting commit caused four LibreOffice tinderbox buildbots to kick off at the same time. Shorter green bars the faster, so as the Olympics has begun, the gold goes to Norbert’s MacOSX Intel box, silver goes to Norbert’s Gentoo box, bronze goes to my Fedora box… but drug test proves that its an incremental build, not a true from-scratch build, so embarrassing disqualification awards the bronze to Lubos’s OpenSUSE-clang box.

Syndicated 2012-07-28 22:43:43 from Caolan McNamara

apple pict documentation

“picture size; don’t use this value for picture size”

Syndicated 2012-07-27 09:43:37 from Caolan McNamara

core components of the core

“specifies a service which allows interfacing the core components of the core”, that’s clear then I hope.

Syndicated 2012-07-26 09:23:09 from Caolan McNamara

deleted easter eggs: team photos, etc.

More nostalgia. Some time around 2010 all the easter egg photos got stripped out of OpenOffice.org. FWIW…
Calc Team circe 2002 (?). What you used to get with =STARCALCTEAM(). This one is still available apparently in the last version of Symphony
writerteam Geordi Release 2002/2003 (?). This one was the last picture you used to get on StarWriterTeam + F3. (Yes, there was a sequence of Star Trek related release names.) I met mmaher, back row, second from right, at my brother’s housewarming earlier this year.
writerteam StarOffice 6.0 Release 2000-2001. This was the earlier version. Seeing as I’m pasted in at the back but mtg (front row, second from right) is present in the flesh it must have been made after March/April 2001 after I transferred from Hamburg to Sun Ireland. Finally met up with mtg at Dublin Zoo + Ballymore Eustace a month ago after a long gap.

The Easter egg police didn’t find them all. At least one of the most ridiculously obscure and pointless Easter eggs still apparently persists in all descendents of StarOffice in each exported .doc. Only mtg ever noticed as far as I know, and only noticed a few months ago after a gap of 11 years or so

The earlier “remove rude comment” police didn’t quite grok the light weight version of hungarian notation we use either, so my use of airlied‘s (then at least) favorite metasyntactic variable in it’s hungarian notation variant of nArse survived that cull and lives on in the rather crufty starmath/equation editor import code.

I miss =game(“StarWars”). If a demonstration was heading south it could always be recovered by launching starwars. “My god, they translated it to German” is the most memorable comment from some LinuxTag or other that I can remember. German was the only language it was in.

Syndicated 2012-07-22 00:02:55 from Caolan McNamara

197 older entries...

New Advogato Features

New HTML Parser: The long-awaited libxml2 based HTML parser code is live. It needs further work but already handles most markup better than the original parser.

Keep up with the latest Advogato features by reading the Advogato status blog.

If you're a C programmer with some spare time, take a look at the mod_virgule project page and help us with one of the tasks on the ToDo list!